name
|
description |
male plug
|
female jack |
pinout |
„External junction box connector“
„Extension port“
|
mini-DIN-like
10pin plug
black color
|
a male plug can be found on a cable from the external junction box above, which was included with Alpine DVA-9860R
|
Alpine DVA-9860R headunit (a short cord with the female jack) –> to the junction box
KCE-350BT extrernal bluetooth box (black connector) –> to any bluetooth extension compatible headunit
|
?? |
Vehicle Display Interface Connector
|
mini-DIN-like
10pin plug
black color
|
|
Found on many Alpine units. Either directly on the unit, on an external box included with the unit.
Alpine DVA-9860R – VDI is located on an external junction box (included with the HU)
(24) standard S/PDIF optical (toslink)
(25) Steering Remote Control Interface Connector
(26) Vehicle Display Interface Connector
Other Alpine HUs don’t use the external junction box.
Alpine CDA-9854R – VDI is located on the cord coming from the back of the HU
|
?? |
older
„FULL SPEED™“
semi-circural
|
mini-DIN-based
10pin plug
blue (turqoise) color
can be used for:
1) for direct iPod connection
2) for Bluetooth box
3) for RCA aux cable
|
Alpine KCE-422i
iPod cable
|
Alpine female plug for KCE-422i cable
Alpine CDA-9886M
other Alpine 2007, 2008 HUs
Alpine KCE-350BT iPod fullspeed plug
IDA-X100 rear side (threre is a wrong connector pictured in the manual!)
|
|
newer
„FULL SPEED™“
single-round-corner |
mini-DIN-based
13pin plug
blue (turqoise) color
|
KWE-460E |
to-the-iPod jack
can be found on some newer headunits
and KCE-400BT external bluetooth box
|
|
newer
„FULL SPEED™“
single-round-corner |
RGB cable |
for example
13 pin RGB extension cable (male-male),
included with Alpine NVE-N077PS / NVE-N099P navigation systems
|
this plug can be found on several devices, but the color and usage differ
KCE-400BT external bluetooth box
– to-the-headunit jack
– purple (light violet) color
– black one
– used on both the headunit and the external box side
NVE-N077PS and NVE-N099P navigation box, KCE-900E interface box
– output function
– RGB display out (direct cable)
– composite display out for non-Alpine LCD display (KCE-030N cable)
CVA-1004R, IVA-W502R, IVA-W505R etc.
– input function
– RGB input
– an external navigation system box (NVE-N077PS, NVE-N099P) can be connected via this
|
Is the pinout different between the purple and the black connector?
|
„Entension port“ |
standard 6pin mini-DIN plug |
|
expansion port on NVE-N099P
what accessory is using this port?
|
?????
maybe a serial interface?
|
MBUS |
Standard DIN 8-pin plug
single wire half duplex transmission
for old 6 disc CD shuttle
|
|
old 1995 casette HU |
MBUS DIN8 pinout |
Ai-Net |
analog stereo line-out
+ bus based on SAE J1850 PWM
example of an advanced setup:
headunit -> DVD player -> audio processor <-CD changer
source: IVA-W505R manual
|
|
|
Ai-NET male female pinout
Alpine Ai-Net protocol reverse-engineered
|
Digital-out |
4pin round plug
S/PDIF coax out
|
KWE-610A optical cable
KWE-610A is a fiber cable with non-standard coax-to-optical adapter on one side.
|
old HUs with „optical out“ (not technically correct)
2008 units:
IVA-W502R
etc
2010 units:
IVA-W520R
2011 units:
IVA-D800R
2014 units
IVA-D511R/RB
X800D-U
INE-W987D
INE-977BT
INA-910R
etc.
list of more units here
|
|
Hi,
Interesting information. Can you tell me if I can use the Standard DIN 8-pin plug to connect a iPod or iPhone or any device with a 3.5 mm conection
Looking forward to hear from you.
Kind regards,
Wolter Lalkens
Hi! Yes you can.
Google for „Alpine DIN8 jack“ or „Alpine DIN AUX IN“
http://www.ebay.com/itm/ALPINE-CAR-RADIO-STEREO-8-PIN-M-BUS-DIN-CABLE-CORD-TO-3-5MM-MINI-JACK-AUX-IN-MP3-/390649710900
Make sure you have this type of connector on your headunit.
Sháním kabeláž mezi ALpine navigaci,bluetooth (2009)a rádio.Nebo náhradní řešení,samotné konektory.Každá rada drahá
a jaká je to přesně navigace (model)?
a pro jaké auto?
Už jsem vypátral prodejce konektorů,samozřejmě číňan :-).Za pět konektorů 470 kč, nic laciného.Kabely udělám plně obsazené 1:1.Jinak rádio je iXa-W404R, navigace NVE-M300P a bt modul KCE-250BT.
Hi, This is a very useful information. I have Alpine CDA-9885, I wanted to play music from my android via bluetooth. So i bought semthing like this https://www.amazon.com/HRB-Bluetooth-KCE-236B-CDE-9885-Interface/dp/B07MQDPT7M
it comes with mini-DIN-based 10pin plug, and first time i tried connecting and playing from bluetooth, no sound at all.. The bluetooth pairing works. I noticed that the mini din 10 pin out of my bluetooth adapter is slightly different. If I compare with the KCE-422i pin out above, my pin is on number 1,4 and 9. while in diagram it supposed to be 1,4, and 8. is that correct?
I opened your link and I can see 1,3 and 8 pins used on the main product image, and 1,3 and 9 in other product images. 1,3 and 8 should be the correct pinout, but the 1,3 and 9 may work too. Pin 1 and 3 are left and right channels, pin 8 is audio ground. Pin 9 is serial communication ground. However, the ground pins 8, 9,1 10 may be interchangable, because they are probably shorted internally.
Hmmm so I went ahead and changed the pin from no 9 to no.8. i tried connect it again with no success. Still no sound coming out from bluetooth player… My android’s bluetooth is surely working, because it can connect to my bluetooth speaker and it works.
What do you think?
Try to pair with different phone (iPhone?).
Try checking the output:
a) download 50hz mp3, play it via bluetooth on max volume and hook a multimeter on GND and left, or GND and right channel. Use 20V AC setting (not DC). Do you see any AC voltage? It should be in 0.5V – 2V range.
or
b) connect the pins to cinch cable and connect it to your home amplifier, do you hear anything?
do you mind send me a link to 50hz.mp3? I’ll give it a try. So you want me to check the output to make sure the bluetooth adapter is properly working right?
The cable pin out should not be the problem at this point?
So, I bought another two cables, mini din plug to 3.5mm aux jack & Ai-net plug to 3.5mm aux jack. like the following link https://www.amazon.com/AI-RCA-Alpine-AI-Net-3-5MM-Auxiliary/dp/B0779N11MP
I confirm the cable from head unit works, I already checked with my original mini din to iPod cable. That ipod cable works.
But, somehow the Mini din plug to3.5mm aux jack still doesn’t work. but the Ai-Net cable works. So I guess there is something wrong with the pin out maybe?
At this point, both mini din to bluetooth adapter and mini din to aux jack don’t work. both has the same pin out 1,4, 9 in mini din plug.
Hi I have a alpine era g311, and I’m trying to find a way to modify the ai-net cable to rca input. I’ve seen it done on YouTube but i can’t find anyone that can do it.
Thank you, very helpful. Best regards!
Prosím, řekněte mi, jaký je vývod konektoru?
Mám IDA-X305s pro Evropu, kde je možné zobrazovat informace na standardním displeji. Na jeden konektor se používají čtyři vodiče. Samotný konektor využívá vnější stínění a tři kontakty v oblasti jeho ploché části. A možná víte, jaký signál je vydáván prostřednictvím těchto kontaktů? Díky předem!
Odpusťte prosím moji češtinu – přeloženo pomocí Google